I bought these compact terminal blocks among the connection hardware for my van. Their four-position arrangement provides a useful contrast with the larger terminal strips and bus bars in the same kit.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought MILAPEAK Four-Position Terminal Blocks as part of my camper van equipment.
I bought these compact terminal blocks among the connection hardware for my van. Their four-position arrangement provides a useful contrast with the larger terminal strips and bus bars in the same kit.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
The twelve-position set expands the screw-terminal layout, while WAGO lever connectors use separate spring-clamp bodies; the connection method and mounting arrangement differ.
Twelve-Position Terminal Block Set
This terminal-block set groups twelve screw-terminal positions beneath removable covers. Included jumper strips link selected terminal positions along a row.
