The green round switches were part of the controls I bought for the camper van. Their small round panel opening is a different physical format from the rectangular rocker controls in the same kit.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought Mxuteuk Green Round Rocker Switches as part of my camper van equipment.
The green round switches were part of the controls I bought for the camper van. Their small round panel opening is a different physical format from the rectangular rocker controls in the same kit.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
Nilight supplies blue illuminated round switches, while Gebildet supplies prewired round switches in several indicator colors; the attached leads and indicator treatment differ.
Nilight Blue Round Rocker Switches
These round on/off rocker switches use blue illumination. Rear blade terminals provide the electrical connections.
