Long 2020 V-slot extrusion rails were among my interior-framing purchases.
The featured Amazon option is SeekLiny 2020 V-Slot Aluminum Rail Pack.
Rail Stock and the Light-Bar Assembly
I cut the extrusion beam and short connector pieces for the roof light-bar assembly.
I drilled attachment holes and used different fasteners at the rack and extrusion connections.
I adjusted the sliding nuts while fitting the assembly to the rack, including loosening bolts to regain access.
The drilled connectors and fasteners joining my added extrusion to the roof rack.The profiles and joint hardware during my roof-mount assembly.
My Takeaway for the Build
The light-bar job required cutting a 2020 beam and joining it above the rack. My V-slot purchase leads to a comparison of the profile itself as well as supplied length. SeekLiny uses V-slot rails, while the alternatives use T-slot sections, so the slot geometry stays visible alongside one- and two-meter stock lengths.
Product Details And Van-Build Uses
Specification
Product Detail
Current Option
SeekLiny rail pack
Profile
2020 V-slot
Stock Length
One meter per rail
The current SeekLiny option provides one-meter rails for cutting and arranging a frame. A cut list should identify each finished member and the joint at each end before the stock is divided. Keep the V-slot profile reference with the selected nuts and plates rather than relying only on the outside dimensions. For a van interior layout, the rail length, joint hardware and panel attachment points need to fit the same drawing while the earlier rail purchase history remains intact.
Include the exact profile, finished member lengths and the joint hardware planned at each end.
Alternative products
Two Alternatives to Compare
SeekLiny provides a V-slot option. ZYLtech and IXGNIJ offer other 2020 extrusion products, with slot shape and supplied length defining the comparison.