I bought KILMAT as part of the van materials and documented the floor-preparation stage before sound deadening. That session started with sweeping and ended with the cleaned floor dried by towel.
I bought KILMAT Butyl Sound-Deadening Mats as part of my camper van equipment.
I bought KILMAT as part of the van materials and documented the floor-preparation stage before sound deadening. That session started with sweeping and ended with the cleaned floor dried by towel.
Preparing the Floor Before the Sound-Deadening Stage
I bought KILMAT as part of the van materials.
I swept and mopped the cargo floor and cleaned the walls.
I worked over remaining residue with drill brushes and dried the cleaned floor with a towel.
Removing stuck-on residue during the floor cleanup.The cargo floor during my preparation session before sound deadening.
My Takeaway from This Job
The documented session is the preparation stage: removing the dust and residue accumulated through earlier work. My floor photographs show that cleanup sequence and give the material purchase its place in the project.
The loose dirt, stuck-on residue and final drying were separate preparation jobs.
Product Details And Van-Build Uses
Specification
Product Detail
Material
Butyl with foil face
Nominal thickness
80 mil
Purchased coverage
36 square feet
KILMAT’s original guide separates panel preparation, cutting, adhesion and rolling. Clean and degrease the receiving surface before laying out the pieces, then cut the sheets to suit the panel shape. Roll the foil face so the material makes contact with the surface beneath it. Plan access around the panel’s fasteners and openings before covering the area. The rolling step belongs with the sheet application, while the sweeping, washing and residue removal shown in Steven’s floor-preparation session come earlier in the sequence.
Rolling presses the sheet against the receiving panel after placement, working across the face rather than only pressing down the edges.
Alternative products
Two Alternatives to Compare
Noico Pro and Siless are alternative butyl-sheet products. Sheet layout and the amount supplied in a package are useful planning differences when laying out material across vehicle panels.
Product
What distinguishes it
Purchase link
KILMAT Butyl Sound-Deadening Mats
KILMAT purchase associated with my floor-preparation stage
