I bought M-D Galvanized Steel Sheet as part of my camper van equipment.
Sheet metal is part of my fabrication purchases, alongside the measuring and fitting shown in the bracket diary photographs.
Sheet Stock Beside the Roof-Mount Fabrication
I cut and drilled aluminum pieces for the roof-camera and light mounts.
I adjusted attachment holes while bringing the assemblies together on the profiles.
I coated the camera-mount pieces black during the fabrication sequence.
A black-coated bracket from my roof camera-mount work.The camera mounting arrangement with its drilled attachments.
My Takeaway for the Build
I cut and drilled aluminum pieces while making the roof-camera mounts. The M-D purchase adds galvanized sheet to the broader fabrication stock. The two A36 alternatives are plate formats, with the square blanks also changing the available shape, so thickness and stock outline matter before laying out a cut.
Product Details And Van-Build Uses
Specification
Product Detail
Brand
M-D
Size
12 × 24 inches
Format
Flat galvanized steel sheet
Small sheet stock makes it possible to lay out a bracket face, backing piece or cover without handling a full-size sheet. Draw the finished outline and any bend lines before cutting, then mark the holes from the actual adjoining parts. A cardboard trial piece helps resolve an awkward angle before committing the metal. Support the sheet while drilling so the hole positions remain accurate. Finishing the cut edges is a separate step before the piece is placed near trim, wiring or other components.
This rectangular A36 steel plate provides broad flat stock for fabrication. Its unperforated surface leaves the hole pattern and cut shape to the project layout.
These LEIFIDE A36 plates provide square hot-rolled steel blanks. Their quarter-inch thickness and unperforated faces leave the fabrication layout to the project.