My coating project covered a much larger area than a small bench job. The Hromee hose belongs to the air-supply purchases that sit between the compressor and the moving work position.
My van with masking around the exterior areas prepared for coating.
The item in my kit
I bought Hromee Air Compressor Hose as part of my camper van equipment.
My coating project covered a much larger area than a small bench job. The Hromee hose belongs to the air-supply purchases that sit between the compressor and the moving work position.
Where it fits my build
I taped the boundaries and covered the areas that would not be painted with plastic sheeting. I then sanded the exposed areas with an orbital sander and 60-grit abrasive, blew away the dust with a compressor, and cleaned and degreased the surfaces.
I mixed clear bedliner with white tint and sprayed the van. After it dried, I removed the masking. The tape and sheeting stage alone took around eight hours, and the finished edges still needed some touch-up.
The side of the van during the white-bedliner project.
My build notes
The most useful detail in my diary is the result, including the problems. Rust-Oleum pooled and dripped in places, and trying to repair one area with a paintbrush made it worse. I wrote that I would use a foam roller for touch-ups and preferred the more consistent finish I had obtained with RAPTOR.
Masking, preparation and application method each became a substantial part of the exterior-coating job.
Alternative products
Two alternatives to compare
Estwing offers a similar loose-hose arrangement. Flexzilla provides a larger-bore hose with its own fitting configuration.
Estwing Hybrid Air Hose
This Estwing air hose combines a flexible hybrid hose with end fittings. It carries compressed air between the supply and the connected tool.
