Camper Van
Freedom.

Vehicle Equipment & Service · My build kit

AP Products Two-Inch Flexible Air Duct

I bought this duct with the van's heating and ventilation materials. My heater diary documents the work involved in positioning the interior outlet and making a cover around it.

By Steven Smith · Camper Van Freedom

Read my build notes ↓
The custom vent cover behind my passenger seat.
The custom vent cover behind my passenger seat.

The item in my kit

I bought AP Products Two-Inch Flexible Air Duct as part of my camper van equipment.

I bought this duct with the van's heating and ventilation materials. My heater diary documents the work involved in positioning the interior outlet and making a cover around it.

Where it fits my build

I removed the passenger seat, marked and cut the floor opening, and drilled mounting holes. After sanding the edges, I applied primer and white paint around the opening before fitting the heater and its connected tubes.

The next stages included mounting the intake, exhaust, fuel filter and pump beneath the van. I then built the black cover with triangular side panels so the interior vent faced toward the cargo area, and continued the fuel-pump wire routing through a factory floor opening.

The underside of the heater installation during the mounting work.
The underside of the heater installation during the mounting work.

My build notes

The custom cover was a significant part of making the installation fit the seat platform. Its sloping back would have directed the vent downward, so I made a separate face for the vent. The panel looked good to me, although an awkward screw position left a hole needing a larger washer.

The heater installation included the mounting, connections and a custom interior cover as separate pieces of work.

Alternative products

Two alternatives to compare

RecPro provides another two-inch flexible foil duct. The plastic heater and defroster hose is two-and-a-half-inch inside diameter and six feet long, offering a different size and construction for a separate air-route design.

RecPro Two-Inch Flexible Foil Duct

RecPro Two-Inch Flexible Foil Duct

This flexible foil duct is supplied as a twenty-five-foot length. Its two-inch nominal size provides an alternative air-route material in the same diameter class.

View on Amazon
Two-and-a-Half-Inch Heater Duct Hose

Two-and-a-Half-Inch Heater Duct Hose

This flexible plastic duct is intended for heater, air-conditioning and defroster routes. Its two-and-a-half-inch inside diameter and six-foot length define a larger air path than a two-inch hose.

View on Amazon

Questions from my build

Where did I install the heater?

Beneath the front passenger seat.

What did I make for the interior vent?

A black aluminum-composite cover with a front face and two triangular side pieces.

← All vehicle equipment & service