Vehicle Equipment & Service · My build kit

CURT 14012 Transit Trailer Hitch

The CURT 14012 is the frame-mounted receiver hitch in my vehicle-equipment purchases. Its Class 4 design and two-inch receiver distinguish it from the Class 3 alternatives listed here.

By · Camper Van Freedom

Read my build notes ↓

The Item in My Kit

I bought CURT 14012 Transit Trailer Hitch as part of my camper van equipment.

Model
CURT 14012
Product class
Class 4
Receiver opening
2 inches

CURT 14012 product reference

Receiver-Hitch Geometry in the Vehicle Plan

  1. I worked underneath the passenger-seat area on the heater intake, exhaust and fuel-system mounts.
  2. The black underbody coating recorded in my notes was Fluid Film Black.
  3. I recorded how cramped and tiring the working position became while reaching the mounting points.
The underside of my van during the heater pipe and mounting work.
The underside of my van during the heater pipe and mounting work.
A later view of the fuel-line and wiring route beneath the van.
A later view of the fuel-line and wiring route beneath the van.
CURT 14012 Transit Trailer Hitch

My Takeaway for the Build

My underbody work made bracket position and working room tangible parts of the build. The CURT 14012 purchase places a two-inch receiver on a frame-mounted crossmember. The two Class 3 alternatives have their own mounting geometry, making product class and attachment layout useful comparisons without reducing the choice to receiver-opening size alone.

Product Details And Van-Build Uses

SpecificationProduct Detail
Model14012
Hitch ClassClass 4
Receiver Opening2 inches

The CURT 14012 is a Class 4 receiver hitch with a two-inch opening and a frame-mounted crossmember. Its original installation sheet identifies the mounting hardware and illustrates the attachment points for the listed Transit applications. That drawing is useful when organizing an underbody project around existing vehicle equipment. For a camper-van build, the receiver opening, mounting plates and space around the rear bumper are separate layout details. The instruction sheet also distinguishes this exact hitch from the Class 3 alternatives already pictured here. My existing build notes remain the record of the work around the van.

Manufacturer Product Reference

Download CURT 14012 Installation Instructions (PDF)

Pro-Lift C-2036D: Folding Creeper And Original Owner Manual

Where Are The Mounting Hardware Details?

The linked CURT 14012 installation sheet includes a hardware list and mounting illustrations.

Alternative products

Two Alternatives to Compare

The CURT 13193 and Geteen options use Class 3 receiver-hitch designs. Their mounting geometry and rated product classes differ from the 14012's Class 4 design.

ProductWhat distinguishes itPurchase link
CURT 14012 Transit Trailer HitchFrame-mounted receiver with side mounting plates.View on Amazon
CURT 13193 Transit Hitch (alternative)CURT Class 3 hitch with two-inch receiver.View on Amazon
Geteen Transit Receiver Hitch (alternative)Geteen Class 3 frame-mounted receiver design.View on Amazon
CURT 13193 Transit Hitch

CURT 13193 Transit Hitch

The CURT 13193 is a Class 3 receiver hitch for listed Transit applications. Its crossmember carries a two-inch receiver opening.

View on Amazon
Geteen Transit Receiver Hitch

Geteen Transit Receiver Hitch

This Geteen hitch is a Class 3 design for listed Transit applications. It carries a two-inch receiver within a frame-mounted crossmember.

View on Amazon

← All vehicle equipment & service