I bought a chrome Vanguard rear bumper guard for my 2023 Ford Transit 250 high-roof extended van and planned to finish it in black bedliner. The bracket assembly stalled when the holes did not line up.
I bought the Vanguard VGRBG-1116-0830SS rear bumper guard for my Ford Transit. It is part of my exterior-equipment purchases, alongside the body preparation and finishing work recorded in my build diary.
My Rear-Guard Bracket Assembly Attempt
I started with the chrome guard, the supplied black brackets, bolts and washers. I worked with the guard across my lap and compared the bracket arrangement with the instruction diagram while trying to bring the connection together.
The useful part of this recording is the close view of the connection: I hold the pieces together and show the holes that did not line up during my attempt.
0:47 · Bracket fitting and the hole comparison, with a labelled close-up. Video by Steven Smith. Caption text.The bracket and rear-guard connection I was comparing during assembly. Frame from my original video, by Steven Smith.
I could not bring the bracket connection together as I expected. I compared what I had in front of me with the instruction diagram and ended the recording considering a return to Amazon. The chrome guard was still an unresolved assembly project at that point.
Did I Finish Installing the Rear Guard in This Recording?
No. I recorded the bracket assembly attempt and the alignment problem; this session ended before a completed installation.
Did I Apply the Planned Black Bedliner Finish?
The black finish was my plan when I introduced the chrome guard. This footage stays with the assembly attempt and does not show that coating being applied.
Read The Assembly Experience In Text
I unpacked the chrome Vanguard rear guard and showed the supplied brackets and bolts. I planned a black bedliner finish to match my van. While assembling the bracket connection, I found that the holes did not line up in the arrangement I was trying. I held the connection close to the camera, compared it with the instruction diagram and considered returning the guard. The recording finishes at that unresolved stage.
Product Details And Van-Build Uses
Specification
Product Detail
Model
Vanguard VGRBG-1116-0830SS
Format
Polished stainless single tube with step pad
Recorded Outcome
Bracket assembly unresolved
The VGRBG-1116-0830SS is the polished stainless single-tube rear guard with a central step pad recorded on this page. My assembly attempt stopped when the bracket holes did not line up as expected. Product references identify the guard, while the footage records that unresolved connection. The planned black bedliner finish remains a plan in that session, not a completed result.
Did The Product Reference Resolve My Bracket Problem?
No. The model information and my recorded assembly outcome are separate. My footage ended without a completed installation.
Alternative products
Two Alternatives to Compare
The Vanguard is the pintle-style rear guard in my purchase record. The Bully CR-600 and Go Rhino D360T are alternative approaches to rear access using a two-inch hitch receiver: the Bully has a compact central step, while the Go Rhino provides a wider dual-step layout; both occupy the receiver opening.
Product
What distinguishes it
Purchase link
Vanguard Rear Bumper Guard for My Ford Transit
Stainless pintle-style Vanguard guard with central step pad.
The Bully CR-600 is a stainless-steel step that mounts in a two-inch hitch receiver. Its compact central step offers an alternative rear-access arrangement.