This page preserves a short Ford reference for the auxiliary switch assembly in the instrument-panel console area. It can help identify the illustrated assembly when organizing documents for a van conversion, but it is not an accessory-wiring or circuit-rating guide.
Identify the switch reference
The PDF is headed 2023 Transit, section 419-10, Multifunction Electronic Modules, and titled Auxiliary Switches. The printed procedure revision is May 28, 2014. Its two pages contain removal illustrations and an installation statement. Keep the source's vehicle context with the document instead of assuming that every van has the same optional equipment.
View PDF: Auxiliary Switches Removal and Installation 419 10 Multifunction Electronic Modules 2
What the two pages show
Page 1 illustrates the console cup-holder area and introduces the assembly-access procedure. Page 2 shows the switch assembly from the front and rear and completes the installation reference. The highlighted connectors locate items in those illustrations.
Separate assembly access from circuit planning
For an access question, record the switch location, visible arrangement and the exact vehicle configuration. For a proposed accessory, make a separate record of the equipment and the electrical information still needed.
- Vehicle record: model year, equipment configuration and photographs of the actual console.
- Accessory record: exact device, its documentation and the function you want to control.
- Document gap: the matching vehicle electrical information and any unanswered connection or rating questions.
- Existing modifications: who installed them and where their wiring record is kept.
Keep the reference with the plan
Open the PDF above for the original assembly illustrations. Use the decision log to keep the access decision and electrical questions traceable, and the cost worksheet to define the equipment and installation scope.
Reference guide expanded October 20, 2026. Original publication date and archived references retained.