I used Hi-Strength 90 while fitting rubber mat to the storage drawer. I cleaned the wood, sprayed sections and rolled the mat into place, then added screws and flat washers.
The drawer lining followed the timber-frame work and the mat cutting. I cleaned the wood with cleaner and degreaser, then worked across it in sprayed sections rather than positioning the whole liner at once.
The smaller pieces around the sides repeated the same process. Screws and flat washers were another attachment step, visible in the close photograph of the lining.
The rubber-lined drawer after the adhesive and fastening work.
Bonding Rubber Mat to the Storage Drawer
I cleaned the wood with cleaner/degreaser.
I sprayed adhesive in sections and used the roller to press the rubber mat.
I attached the liner with screws and flat washers as well.
My lining also used screws and flat washers as attachment points.
My Takeaway for Choosing the Kit
The useful lesson from my build is the sequence: clean, work in sections, press the mat, then complete the screw-and-washer attachments. Gorilla’s alternative offers repositioning during application; Super 77 is another multipurpose aerosol formulation. I would compare those formulations against the actual materials, without crediting the adhesive alone for a lining that also used fasteners.
Product Details And Van-Build Uses
Specification
Product Detail
Form
Aerosol contact-type adhesive
Base
Synthetic elastomer
Spray Pattern
Variable lace
Appearance
Translucent
The 3M aerosol data sheet identifies compatible bonding materials including wood, decorative laminate and SBR rubber. That makes material identification useful when planning drawer liners, cabinet panels or other sheet-material projects. My drawer method combined sprayed sections, rolling pressure and screw-and-washer attachments. The data sheet explains application and bonding conditions; the photographs above show my particular construction sequence.
They are separate 3M spray-adhesive formulations. Compare their material lists and application information rather than treating the names as interchangeable.
Alternative products
Two Alternatives to Compare
Gorilla Heavy Duty Spray Adhesive provides a repositionable spray-bonding option. 3M Super 77 is another multipurpose aerosol adhesive. These are alternative formulations to compare by the materials being joined and the application process, alongside the section-by-section approach I used with Hi-Strength 90.
Product
Why compare this option
Purchase link
3M Hi-Strength 90 Spray Adhesive
Spray adhesive used in my rubber drawer-lining sequence.
This multipurpose spray adhesive applies a clear bonding layer over broad surfaces. It allows repositioning during application before forming a permanent bond.
This multipurpose aerosol adhesive bonds materials such as fabric, paper, wood and metal. Its spray application covers broad areas during lining and fabrication work.
