I cut the coin-pattern rubber into separate pieces for the drawer base and sides. The finished lining combined spray adhesive, rolling, and screws with flat washers at the attachment points.
The timber drawer was already taking shape around the storage bins when I added the lining. I cut the rubber with scissors, cleaned the wood and applied spray adhesive in sections before pressing the material down with a roller.
I also used screws and flat washers to attach the lining. The close photograph is useful because it shows the edge attachment; the wider photograph shows how the cut pieces formed the drawer interior.
Rubber matting fitted to my storage-bin drawer.
Cutting and Attaching the Drawer Lining
I cut rubber mat for the drawer base and shorter side pieces.
I cleaned the wood, sprayed adhesive in sections and pressed the lining with a roller.
I added screws and flat washers to attach the mat to the base and sides.
A screw and flat washer holding the rubber lining in my drawer assembly.
My Takeaway for Choosing the Kit
I would shop for enough material to lay out the base and side pieces before making cuts. TUFFIOM changes from rubber to PVC and uses a diamond pattern. Rubber-Cal keeps a rubber material but uses a diamond-plate texture and a smaller blank. Those differences belong beside the roll size in a liner comparison.
Product Details And Van-Build Uses
Specification
Product Detail
Surface
Raised coin pattern
Format
Cuttable rubber roll
Listed roll
3.28 × 16.4 feet
A rubber drawer liner follows the inside dimensions after the drawer has been assembled. Make separate patterns for the base and any lined sides, noting where each corner meets the next piece. Trial the cut pieces before applying adhesive so the patterned surface and edge joints can be aligned. My photographs show the MYOYAY material fitted around the storage-bin drawer. The thickness also affects the remaining opening around a bin, so check the final fit with both the lining and container in place.
Check it after accounting for the lining on the base and any covered sides, which reduce the usable opening.
Alternative products
Two Alternatives to Compare
TUFFIOM uses PVC and a diamond pattern, while the Rubber-Cal option uses rubber with a diamond-plate texture. Material, texture and the size of the blank are the useful differences to compare with the coin-pattern roll I cut for my drawer.
Product
Why compare this option
Purchase link
MYOYAY Coin-Pattern Rubber Mat
Coin-pattern rubber roll cut for my drawer base and sides.
This PVC flooring roll has a raised diamond pattern for utility and garage surfaces. It offers a different surface texture and material from coin-pattern rubber matting.
