I bought HD Ridez Transit running boards for the van. The current listing calls them N-Series running boards, with tubular frames surrounding slotted step plates.
My HD Ridez N-Series Running Boards Project records the board laid out beside the van, the prepared mounting points, the attached brackets and the finished passenger side.
The Passenger-Side Work Beneath the Doors
I loosened the lower-trim clips to reach the mounting area. In the next views, I showed the prepared mounting points and then the attached bracket, before walking along the installed passenger-side board.
My passenger-side board laid out before mounting.The passenger-side result from my project film.
My Takeaway from the Passenger-Side Result
I liked the way the finished board looked and lined up beneath the doors. My closing walkaround shows that passenger-side result; I still had the driver side to do.
For comparison, the aluminum APS design has a broad flat tread, while the stainless-steel APS design uses a split board assembly. Both differ from the tubular frame and slotted step plates of my HD Ridez purchase.
Product Details And Van-Build Uses
Specification
Product Detail
Guide Part Number
WB-FN425MD
Set
Driver/left and passenger/right boards
Mounting Parts
Brackets, U-bolts and bolt plates
The NB1 Overland installation sheet distinguishes the driver board from the passenger board and identifies the brackets used at each mounting position. Its parts list separates U-bolts, bolt plates, clip nuts and retainers, which helps organize the hardware before working along the lower body. The illustrated sequence also shows how the underside trim relates to the attachment locations. Those details complement my running-board project photographs and the work beneath the van. In my recorded project, the passenger side was completed and the driver side remained to do; that outcome is unchanged.
These APS running boards use six-inch aluminum step surfaces with black powder coating. Their broad, flat tread differs from the tubular, slotted drop-down design shown in Steven’s project.
These APS running boards use black-coated stainless steel and full-length step pads. The listing describes a split board design, distinct from both the one-piece aluminum alternative and the tubular drop-down board in Steven’s footage.