This reference covers rear-door interior trim on the 2023 Ford Transit. Use it to understand the factory panel arrangement before planning insulation or a custom door lining.

Open The Rear Door Trim Reference

The three-page document identifies workshop section 501-05, Interior Trim And Ornamentation. Its procedure revision is May 21, 2014. the displayed vehicle is a 2023 Transit.

Check Your Door Configuration

The illustrations show a high-roof door and the right side. The document describes the left side and other roof configurations as similar. Compare the trim, handles and equipment shown.

The reference distinguishes upper trim, optional upper side pieces, the right-side emergency handle and lower trim. The emergency handle has a cable connection. Consult the illustrated procedure for that connection instead of treating the handle as another trim clip. After reassembly, confirm that the handle and door operate correctly.

Plan The Replacement Lining

Before covering the door, identify the factory components that must remain accessible and check how the new lining affects handles, trim fit and door closure. The PDF is a trim-removal reference; it does not specify your conversion's insulation thickness, replacement fasteners or attachment strength.

Explore Interior Wall Panel Options for lining choices and the Van Build Diary for project photographs. For the applicable factory repair information, start with Motorcraft Technical Resources and verify the vehicle selection. Some resources require a subscription or fee.