The Water-System Concept in These Notes
The original notes propose a modular water compartment built around 2020 framing, a pan beneath the components and transparent access doors. They describe a layout idea.
Use the concept to plan where the system can be inspected and serviced. First draw the space available in your own layout, then identify the exact components and the information still needed for each connection. Keep the water-system drawing separate from assumptions about how much room the surrounding furniture will leave.
Original Planning Notes
- Place water components in modular 2020 framing, and put some type of waterproofing around it, especially on the floor of it.
- Put a pan under ALL of the water system components, including the water tanks.
- Make one using 2020 and sheet metal aluminum
- Put plexi-glass doors to view the water system on passenger side, with LED strips, and handles to open doors.
Plan Access Around the Components
- Component record: list each selected tank, pump, filter, fitting and other part by its actual identifier. Mark undecided items as open choices.
- Inspection: identify which connections can be seen with the access door open and which remain hidden.
- Service space: show how each serviceable part can be reached and removed, rather than recording only its installed outline.
- Containment: sketch the proposed pan and its boundaries. Record its intended purpose and the construction details that still need to be resolved.
- Doors and lighting: draw the door opening and the location of any planned inspection lighting. Check that these features leave the required access.
Keep the Unresolved Design Decisions Visible
Likewise, transparent doors can help with visibility but do not resolve access behind the tanks. Record those as separate questions instead of treating the original sketch concept as a finished specification.
Keep component instructions with the project for installation, operation and maintenance details.
Use the layout measurement worksheet to record the available compartment space. The framing gallery guide helps separate visible arrangements from unknown details. Track unresolved choices in the van-build decision log.
Reference guide expanded October 20, 2026. Original publication date and archived references retained.
Watch: Water System Layout
My narrated guide follows the water-compartment concept, inspection views and access planning.
Press Play To Start The Video.
Read The Video Transcript
Hey, I'm Steve Smith with Camper Van Freedom. My water-system notes describe a modular compartment idea, with framing, a pan below the components and transparent access doors. The useful starting point is the space available in the van. Draw that compartment before assuming how much room the surrounding furniture will leave. Keep the concept and the selected component details together as the layout develops.
Start the component record with each actual tank, pump, filter, fitting and other selected part. Use its real identifier and keep the relevant instructions with the project. Leave an undecided component as an open choice. That gives the drawing a clear connection to the parts being considered without turning an early sketch into a completed installation record.
Next separate visibility from access. With the proposed door open, which connections could you inspect directly? Which would remain behind a tank or another component? Transparent doors were part of my original concept, but seeing through a door does not show every hidden connection. Mark the visible and hidden areas on the layout.
Service space is more than the outline of an installed part. Draw the space needed to reach it and the path needed to remove it. Check those paths against adjacent framing, doors and furniture. Keep each component's maintenance and installation information with its record so the access plan follows the actual part.
The proposed pan belongs on the same drawing. Show its boundaries, its intended purpose and the construction details that still need to be resolved. My original notes considered framing and aluminum sheet for that idea. Draw the proposed door openings and any inspection lighting separately, then check how they affect the room available for access.
Keep the unresolved decisions visible as the plan changes. Record the compartment measurements, selected components, inspection views, removal paths and the current drawing version. My water-system guide links the concept to the layout measurement worksheet and the build decision log. Thanks for watching. I'm Steve Smith with Camper Van Freedom. Draw the space, identify the parts and leave room to inspect and service them. See you next time.
Watch On YouTube
Watch On YouTube · English Captions (VTT) · Download The Transcript